- Perth / Perkins original spare parts
- Perkins repair parts inquiry
- Perkins Parts Service Center
- Perkins Parts System Atlas
- Caterpillar .CAT Diesel Engine Parts
- john deerejohn deere accessories
- Mitsubishi Engine Parts Center
- Genuine Volvo diesel engine parts
- Qianglu Diesel Engine Parts Maintenance Technology
- Perkins Technology Center
- Cummins engine generator parts
- Mitsubishi Diesel Engine Generator Maintenance
- Perkins engine parameters
- Perkins / Perkins industrial engines
- The parameters of the British Willson generator set
- Generator Leasing Service Center
- Volvo diesel generator set
- Diesel generator grid-connected and parallel
- Cummins diesel generator set
- Japan Mitsubishi Diesel Generator Set
- Caterpillar generator set
- Generator dual power conversion cabinet ATS
:0574-26871589 Unit sales : 0574-26871589
:0574-26886646 Accessories Sales : 0574-26886646
:0574-26871569 Maintenance Hotline : 0574-26871569
pass :0574-26892499 True : 0574-26892499
Ground : 宁波戚家山联合路 246-252 号 Address : No. 246-252 , Lianhe Road, Qijiashan , Ningbo
Check Mitsubishi S6R Thrust Pad
Check the sliding surface, back surface, and end surface of the thrust piece. If there is any abnormality such as poor contact, sliding damage, corrosion, or foreign matter insertion, replace it with a new one.
Check thrust piece
5.15 Measure the thickness of thrust plate
Measure the thickness of the thrust piece.
Replace the thrust pad with a new one when the limit is exceeded. According to the degree of wear of the crankshaft of the Mitsubishi S6R diesel engine, when the crankshaft of the Mitsubishi S6R diesel engine is re-ground and used, an enlarged thrust plate is used. For the grinding method of the Mitsubishi S6R diesel engine crankshaft, please refer to the item "Polishing the journal width of the rear end Mitsubishi S6R diesel engine crankshaft.
Note: (a) The enlarged sizes of thrust plates are 0.25, 0.50, and 0.75 mm.
(b) The increased size thrust plate can be used on one side (combination of upper and lower plates). When adjusting the axial clearance, the grinding amount of the crankshaft of Mitsubishi S6R diesel engine can be minimized.
Thrust plate thickness
4.78 to 4.85 mm
5.03 to 5.10 mm
5.28 to 5.35 mm
5.53 to 5.60 mm