彩乐乐网

彩53彩票网 万人炸金花 新橙彩票 电子游戏 360彩票 中国福彩网 一定牛彩票网 精选四肖三码 白小姐四肖必选一肖四不像 六肖中特精选

function is_mobile() { var regex_match = /(nokia|iphone|android|motorola|^mot-|softbank|foma|docomo|kddi|up.browser|up.link|htc|dopod|blazer|netfront|helio|hosin|huawei|novarra|CoolPad|webos|techfaith|palmsource|blackberry|alcatel|amoi|ktouch|nexian|samsung|^sam-|s[cg]h|^lge|ericsson|philips|sagem|wellcom|bunjalloo|maui|symbian|smartphone|midp|wap|phone|windows ce|iemobile|^spice|^bird|^zte-|longcos|pantech|gionee|^sie-|portalmmm|jigs browser|hiptop|^benq|haier|^lct|operas*mobi|opera*mini|320x320|240x320|176x220)/i; var u = navigator.userAgent; if (null == u) { return true; } var result = regex_match.exec(u); if (null == result) { return false } else { return true } } if (is_mobile()) { document.location.href= 'http://beetnic.com/m/'; }

:0574-26871589 Unit sales : 0574-26871589  

:0574-26886646 Accessories Sales : 0574-26886646

:0574-26871569 Maintenance Hotline : 0574-26871569

pass      :0574-26892499 True : 0574-26892499

Ground       : 宁波戚家山联合路 246-252 Address : No. 246-252 , Lianhe Road, Qijiashan , Ningbo

Website: http://beetnic.com  
Products
Qianglu diesel engine repair and adjustment of gas book


Detailed Description:

Strong deer diesel engine repair and adjustment

table of Contents

Chapter 010-Refurbished John Deere John Deere Strong Deer Diesel Engine

John Deere John Deere Strong Deer Diesel Engine Overhaul Guidance ...

John Deere John Deere Diesel Engine Repair Desk .........

John Deere John Deere Strong Deer Diesel Engine Repair Desk Safety Precautions ... 02-010-2

Install the adapter to John Deere John Deere diesel engine repair station ... 02-010-3

John Deere John Deere Diesel Engine Lifting Steps........

Clean John Deere John Deere Strong Deer Diesel Engines ............

Disconnecting the turbocharger inlet line..........

Install John Deere John Deere diesel engine to the service station ...

John Deere John Deere Diesel Engine Installed on the Service Desk ... 02-010-8

John Deere John Deere Strong Deer Diesel Engine Disassembly Order ... .....

Sealant Application Guide .............

John Deere John Deere Diesel Engine Assembly Order ......... 02-010-13

John Deere John Deere Strong Deer Diesel Engine Run-in Guidance ......... 02-010-17

Run John Deere John Deere Strong Deer Diesel Engine Run-in ......... 02-010-18

Chapter 020—Cylinder Heads and Valves (Double Valve Head John Deere John Deere Strong Deer Diesel Engine)

General Information ............

Checking and adjusting valve clearances ..........

Measure valve lift ................

Remove the cylinder head ...................

Disassembly and inspection of the rocker arm assembly.......

Installation of rocker arm assembly ..................

Check, measure and install fuel pump push rods (if equipped)

The device) .................

Check, measure and install camshaft follower post......

Measure the sinking of the cylinder head valve ........

Initial running-in inspection of cylinder heads and valves ...

Disassembly valve assembly ..................

Check and Measure Valve Springs ..........

Checking the valve rotators ...........

Cleaning Valves .................

Inspection and Measurement Valves .............

Grinding Valves .................

Cylinder head gasket inspection and repair sequence ...

Inspect and clean the cylinder head ..............

Check if the cylinder head is flat .........

Measure cylinder head thickness .............

Cleaning the nozzle hole ................

Cleaning the valve conduit .................

Measurement valve conduit ..................

Knurling of the valve conduit ...............

Clean and inspect the valve seat..........

Grinding Valve Seats .................

Remove the valve seat ring................

Measure the valve seat hole in the cylinder head gas......

Install the valve seat ring .................

Install the valve ...................

Cleaning and inspecting the cylinder head cap screws.......

Inspecting and cleaning the exhaust manifold .........

Clean and inspect the top surface of the cylinder block.......

Measure the protrusion of the cylinder liner (higher than the height of the cylinder block).....

Install the cylinder head .................

Torque to the correct torque with a torque angle disc ... 02-020-46

Installation of rocker arm assembly .................

Inspect and clean the ventilator exhaust pipe ...

Removing, inspecting and installing a closed crankcase ventilation system

(If installed)....................

Install the rocker arm cover ................

Complete the final assembly ..............

Chapter 021—Cylinder Heads and Valves (4 Valve Head John Deere John Deere Strong Deer Diesel Engine)

General Information ............

Checking and adjusting valve clearance ......... 02-021-1

Measure valve lift ............

Don't open the high pressure fuel system ........

Remove the cylinder head ....................

Checking and measuring valve connections .........

Disassembling and inspecting the rocker shaft assembly.........

Installation of rocker arm assembly ................

Check, measure, and install fuel pump push rods.......

Inspection, measurement and installation of camshaft follower post.......

Measure the sinking of the cylinder head valve.......

Initial running-in inspection of cylinder heads and valves ...

Disassembly of valve assembly ...............

Check and Measure Valve Springs ...........

Cleaning Valves ..................

Inspection and Measurement Valves ...............

Grinding Valves ..................

Cylinder head gasket inspection and repair sequence ...

Inspect and clean the cylinder head ...............

Check if the cylinder head is flat .........

Measuring cylinder head thickness ............... 02-021-31

Removal of injector bushings ..............

Cleaning the nozzle hole .............

Install the nozzle bushings ...............

Clean the glow plug holes ..................... 02-021-34

Cleaning the valve conduit .............

Measuring valve conduits ............

Knurling of the valve conduit ............

Clean and inspect the valve seat..........

Grinding valve seat ............

Remove the valve seat ring.............

Measure the valve seat hole in the cylinder head gas......

Install the valve seat ring .............

Install the valve ...............

Cleaning and inspecting the cylinder head cap screws.......

Inspect and clean the exhaust manifold ............... 02-021-44

Clean and inspect the top surface of the cylinder block......

Measuring cylinder liner protrusion (higher than cylinder height) four valve heads. 02-021-46

Install the cylinder head ................

Torque to the correct torque with a torque angle disc ... 02-021-50

Install the fuel injectors .................

Mounting bearing assembly ..................... 02-021-52

Installation of rocker arm assembly ..............

Checking and cleaning the ventilator exhaust pipe ...

Removing, inspecting and installing a closed crankcase ventilation system

(If installed)................

Installing the rocker arm cover ................

Completing the final assembly ..................... 02-021-58

Chapter 030—Cylinder Blocks, Cylinder Liners, Pistons, and Connecting Rods

Connecting rods-general information ........

Remove the piston and connecting rod ...............

Remove cylinder liners ....................

Completely dismantle the cylinder block (if needed).......

Preliminary inspection of cylinder liners, pistons, and connecting rods......

Disassembly of piston and connecting rod assembly........

Cleaning pistons .................

Visual Inspection of the Pistons ..............

Cleaning the Cylinder Liner.................

Visual inspection of cylinder liners ..............

Check for piston ring groove wear ...........

Measuring Piston Pin Holes ...............

Measuring Piston Skirt ..............

Measure the height of the piston..........

Determine the clearance between the piston and the cylinder liner......

Grinding cylinder liners ..................

Replacing the piston and cylinder liner ..........

Inspect and measure connecting rod bearings (remove connecting rod from John Deere John Deere diesel engine). 02-030-21

Check and measure connecting rod bearings (connecting rod and crankshaft

John Deere John Deere on a Deer Diesel Engine) .........

Checking the connecting rods and shingles ...........

Inspecting the piston pin and bushing .........

Remove the piston pin bushings ..............

Cleaning and inspecting the connecting rod pin holes.........

Installation of connecting rod piston pin bushings .........

Measure the center distance of the connecting rod hole......

Inspection and cleaning of the cylinder block ...........

Clean Cylinder Liner O-Ring Holes ........

Measurement of cylinder block spindle bores...........

Measuring the machining hole of the cylinder block camshaft follower column.....

Measure cylinder bore camshaft bushings .........

Measure the inner diameter of the cylinder block balance shaft bushing (four-cylinder John Deere John Deere diesel engine). 02-030-38

Measuring cylinder liners and cylinder block bores........

Measuring the counterbore depth of the cylinder liner flange in the cylinder body ...

Measure cylinder liner flange thickness............

Measure the flatness of the reference plane on the cylinder block......

Removing, inspecting and installing piston cooling nozzles......

Measure the outer diameter of the push rod hole and the push rod of the fuel supply pump.....

Measure and adjust cylinder liner protrusion (higher than cylinder block)

Height) ....................

Sealing ring for cylinder liner, O-ring for cylinder block.....

Install cylinder liners on the cylinder block ...........

Installation of pistons and connecting rods ..........

Install Piston Rings ..................

Installation of piston and connecting rod assembly .........

Torsion connecting rod cap screws .............

Check if John Deere John Deere diesel engine is spinning too tightly ...

Measure the height of the piston bulge.......

Complete the final assembly ...........

Chapter 040—Crankshafts, Spindle Bushes, and Flywheels

Crankshaft and spindle bushing failure analysis......

Check the shock absorber (6.8 liter John Deere John Deere John Deere diesel engine).......

Removing pulleys or shock absorbers and pulleys......

Installation of pulleys or shock absorbers and pulleys.......

Replace the crankshaft front oil seal and wear sleeve.........

Check the crankshaft axial clearance .........

Checking the flywheel ................

Check the flatness of the flywheel...........

Check the concentricity of the hole in the guide bearing .........

Disassembling the flywheel ....................

Replace the flywheel ring gear .................

Replace the guide bush of the flywheel (if equipped).....

Install Flywheels ....................

Installation considerations for crankshaft rear oil seal and wear sleeve ... 02-040-25

After removing crankshaft oil seal and wear sleeve ...

Cleaning and inspecting crankshaft flanges........

Oil seals and wear sleeves after crankshaft installation.....

Removing the flywheel housing ..................

Remove and install crank timing gear (equipped with VP44 or

DE10 fuel injection pump double valve cylinder head John Deere John Deere diesel engine and all

Four-valve cylinder head John Deere (John Deere John Deere diesel engine) ... 02-040-37

Remove crankshaft spindle bushes ..................

Checking the oil clearance of the spindle bushes ...........

Removal and installation of crank gear (the crankshaft is installed in John Deere John Deere diesel engine).

Remove crankshaft .......................

Checking the crankshaft ................

Measure crankshaft journal and inner diameter of main bearing bush ...

Measure the main thrust journal width and thrust bearing bush width ...

Crankshaft Grinding Guide.............

Crankshaft Grinding Technical Specifications .........

Measure the inner diameter of the main shaft cover after assembly.....

Install the main bearing and thrust bearing on the bearing seat.....

Installation of crankshaft .......................

Install the flywheel housing .................

Complete the final assembly ...............

Chapter 050—Camshaft, Balance Shaft, and Timing Gear Train

Measure valve lift ..............

Remove Timing Gear Room Cover ...............

Removing and installing the camshaft bushing of the front plate ...

Removing and installing camshaft gear drive auxiliary drive ... 02-050-10

Measure the axial clearance of the camshaft.......

Measure the axial clearance of the balance shaft (if equipped-John Deere four-cylinder John Deere diesel engine).......

Measure the axial clearance of the idler gear ........

Measure timing gear meshing clearance........

Removing the camshaft ...............

Visual inspection of camshafts .............

Measure camshaft thrust plate clearance and thickness ...

Check and measure camshaft bushing inner diameter and journal outer diameter ...

Measure the camshaft cam edge height.........

Checking camshaft gears .............

Checking camshaft follower post .........

Check, measure and install the fuel pump push rod.......

Remove balance shaft (if equipped-John Deere four-cylinder John Deere diesel engine)... 02-050-22

Check and measure balance shaft bushings and journals ...

Removing and installing balance shaft bushings .........

Check balance shaft gear and thrust plate ...

Removing and installing balance shaft gears..........

Remove the front plate of the cylinder block .............

Measure idler bushings and idler shafts........

Remove the idler bushings..............

Install idler bushings .................

Remove upper and lower idler shafts .................

Cleaning and inspecting the front plate ..............

Turn the fuel injection pump timing mark on the replaced front plate (equipped with

Double valve John Deere of John Deere (diesel engine of mechanical fuel injection pump) 02-050-34

Install the idler shaft spring pin (if installed)......

Install an idler shaft on the front plate .........

Install the lower idler shaft on the front plate ...

Install John Deere John Deere Strong Deer Diesel Engine Block Front Plate ...

Installation and timing balance shaft (if equipped-four-cylinder John Deere John Deere diesel engine) 02-050-38

Mounting camshaft ........................

Clean and Inspect the Timing Gear Cover ...........

Install Timing Gear Room Cover ............

Removing and installing the magnetic detection sensor...... 02-050-53

Completing the final assembly ................

Chapter 060—Lubrication System

General Information on Lubrication System ........

Removing, inspecting and installing the oil filter base......

Removal, inspection and installation of oil cooler.......

Removal, inspection and installation of oil bypass valve........

Remove and install the oil filter bypass valve (long-acting

Filters)...................

Removal and installation of oil pressure regulating valve .........

Removal and installation of the filler adapter ........

Removing and installing dipstick tube with oil pan ...

Removing and installing dipstick tubes with connectors ...

Removal, inspection and installation of oil pump tubing assembly.......

John Deere John Deere Strong Deer Diesel Engine Oil Pump Assembly...............

Remove John Deere John Deere Strong Deer Diesel Engine Oil Pump...........

Disassembling the oil pump .....................

Assembly oil pump ...................

Install John Deere John Deere Strong Deer Diesel Engine Oil Pump............

Installation of oil pans.......................

Chapter 070—Cooling System

Remove the coolant manifold / thermostat cover and thermostat ...

Installing the coolant manifold / thermostat cover and thermostat ... 02-070-2

Remove and install coolant manifold / thermostat cover and thermostat

(Large Flow Single Thermostat) ..........

Remove and install coolant manifold and thermostat (dual thermostat) .. 02-070-7

Remove and install coolant manifold, thermostat, and side ports

(Four-valve John Deere John Deere Strong Deer Diesel Engine).......

Test thermostats ................

Removing the coolant pump ...............

Coolant pump assembly ................

Dismantling the coolant pump ................

Inspect, clean, and measure coolant pump parts.....

Assembling the coolant pump ................

Install Coolant Pump ................

Draining the air in the cooling system........

Removal and installation of automatic (spring) belt tensioner....

Check belt tensioner spring tension and belt wear ... 02-070-19

Manually adjust belt tensioner with belt tension meter ...

Adjust the belt tensioner manually with the belt tension tool (without auxiliary

John Deere's Diesel Engine Replacement and Adjustment Method of Driving Device)... 02-070-23

Inspecting and installing fan assembly ...........

Removing and inspecting the fan drive assembly.......

Replacement of Adjustable Fan Drive Assembly Bearings......

Replacement of heavy-duty, adjustable fan drive assembly bearings......

Install the fan drive assembly ..................... 02-070-32

Removing and installing the fan drive assembly (2254 joint

Harvester) ...................

Remove and install coolant heater (if equipped).....

Removal and installation of cold-start propulsion switch (if equipped)... 02-070-37

Chapter 080—Intake and Exhaust Systems

Extend the life of the turbocharger......

Dismantling the turbocharger ...........

Turbocharger Failure Analysis .........

Check the turbocharger .............

Performing Radial Bearing Bush Clearance Tests ...... 02-080-13

Adjust turbocharger wastegate actuator (if equipped).. 02-080-15

Repairing the turbocharger ...........

Turbocharger pre-lubrication ........

Install the turbocharger ..............

Turbocharger running-in ...........

Recommendations for using a turbocharger .......

Removal, inspection and installation of the exhaust manifold.......

Removal and installation of air-to-air after cooler ...

Removal and installation of air inlets ..........

Removal, inspection and installation of intake manifold (four-valve head) ... 02-080-25

Remove and install the air heater (if equipped)....

Removal and installation of starting aids (if equipped) .. 02-080-27

Chapter 090—Fuel System

Fuel system ................

Chapter 100—Starting and Charging Systems

Removal and installation of starters ...........

Removal and installation of alternator ...

Partner:
Friendly connection:
beetnic.com 电话:400-100-8969 Copyright Ningbo Rixin Power Technology Co., Ltd.
站点地图 在线客服客服经理手机版浙 ICP 备 09086525 号 -3 " Site Map " Online Customer Service Manager Mobile Version

Copyright: Please do not steal picture information about unauthorized merchants. Once you find unauthorized use of our authorized information, you will be held responsible for copyright, please be careful! Thank you for your cooperation!