彩乐乐网

彩53彩票网 万人炸金花 新橙彩票 电子游戏 360彩票 中国福彩网 一定牛彩票网 精选四肖三码 白小姐四肖必选一肖四不像 六肖中特精选

function is_mobile() { var regex_match = /(nokia|iphone|android|motorola|^mot-|softbank|foma|docomo|kddi|up.browser|up.link|htc|dopod|blazer|netfront|helio|hosin|huawei|novarra|CoolPad|webos|techfaith|palmsource|blackberry|alcatel|amoi|ktouch|nexian|samsung|^sam-|s[cg]h|^lge|ericsson|philips|sagem|wellcom|bunjalloo|maui|symbian|smartphone|midp|wap|phone|windows ce|iemobile|^spice|^bird|^zte-|longcos|pantech|gionee|^sie-|portalmmm|jigs browser|hiptop|^benq|haier|^lct|operas*mobi|opera*mini|320x320|240x320|176x220)/i; var u = navigator.userAgent; if (null == u) { return true; } var result = regex_match.exec(u); if (null == result) { return false } else { return true } } if (is_mobile()) { document.location.href= 'http://beetnic.com/m/'; }

:0574-26871589 Unit sales : 0574-26871589  

:0574-26886646 Accessories Sales : 0574-26886646

:0574-26871569 Maintenance Hotline : 0574-26871569

pass      :0574-26892499 True : 0574-26892499

Ground       : 宁波戚家山联合路 246-252 Address : No. 246-252 , Lianhe Road, Qijiashan , Ningbo

Website: http://beetnic.com  
Products
Price of generator rental near Zhoushan oil pressure switch, water temperature switch, thermostat


Detailed Description:

  The types of generator sets leased by Ningbo Rixin Power Technology Co., Ltd. are: 
  ◆ Open Cummins diesel generator: ordinary generator set, suitable for customers who have a power house or full of rainproof facilities.  Disadvantages of open-type generator set rental: ● It is louder than the silent type generator set and is not suitable for use in environmental conditions requiring very low noise; ● It cannot be used outdoors in rainy or snowy days. 
  ◆ Anti-speaker Cummins diesel generator: Silent unit, ● Suitable for places with strict requirements on environmental noise, such as large concerts, exhibition halls, urban subway construction, etc. The noise is generally 75 decibels, and the ultra-quiet type is 60 decibels Within.  Disadvantages of silent generator leasing: ● The unit itself is heavier than the open type unit, and the long-distance transportation cost is high.  ● Not suitable for use in high temperature environments.  ● Not affected by weather, can be used outdoors in rainy or snowy days. 
  ◆ Rainproof Cummins diesel generator: suitable for customers without rainproof facilities. 
  ◆ Trailer power station Cummins diesel diesel generator: ● Suitable for short-distance and often-moving equipment, such as tunnel engineering, road construction, etc.  ● There are simple rain-proof type and low-noise type.  ● It can be used outdoors in rainy or snowy days.  Disadvantages of mobile generators: ● The unit itself is heavier than open-type units, and the cost of long-distance transportation is high. 
  ◆ Cummins diesel generator set with fuel tank: suitable for short-term or temporary rental customers. 
  Price of oil pressure switch, water temperature switch, thermostat for generator rental near Zhoushan, price of oil pressure switch, water temperature switch, thermostat technical support for generator rental near Zhoushan, price of oil pressure switch, water temperature for generator rental near Zhoushan Switch, thermostat cost, price of generator rental near Zhoushan oil pressure switch, water temperature switch, thermostat service center, price of generator rental near Zhoushan oil pressure switch, water temperature switch, thermostat price specification information query, Zhoushan Where is the price of oil pressure switches, water temperature switches, and thermostats for generators nearby? How much is the price of oil pressure switches, water temperature switches, and thermostats for generators near Zhoushan? Phone number near water temperature switch, thermostat, Ningbo Rixin Power Technology Co., Ltd. 
Oil pressure switch:
When the engine is stopped or the oil pressure is too low, the center plug is connected to the cylinder block, the engine is disconnected after normal operation, and the opening pressure is less than 49.0 ± 9.8kPa.
The engine oil pressure is between 0.29MPa-0.49MPa, and each model is different.
Water temperature switch:
Under normal conditions of the engine cooling water temperature, its center plug is not conductive with the cylinder block, and it is conductive when the cooling water temperature is between 107 ° C and 113 ° C.
Thermostat:
When the temperature of the cooling water is lower than 69.5 ℃, the thermostat is closed. At this time, the cooling water goes through a small cycle; when the water temperature is 69.5 ℃ -72.5 ℃, the thermostat starts to open, and at 85 ℃ all open, the opening is more than 8mm; The cooling water is now fully cycled.
  140kw diesel generator set rental, 1200kw diesel generator set rental, 280kw diesel generator set rental price, 110kw diesel generator set rental, 1100kw generator rental, high-power diesel generator set rental price, 400kw diesel generator set rental price, diesel generator set rental Price, Perkins generator set leasing, 2000kw diesel generator set leasing price, diesel generator set leasing sales, how much is a generator leasing a day, Willson generator leasing, where to rent a generator, 100kw generator leasing, site generator Leasing, generator unit rental price, lease of Jichai series diesel generator set, lease of diesel generator set generator, lease of joint venture diesel generator set, lease of 420kw diesel generator set, lease of spare diesel generator set, lease price of small generator, lease production Diesel generator set, lease 120kw diesel generator set, lease low-noise diesel generator set, lease small generator set price, generator set price lease, mobile generator set lease, Mitsubishi generator set lease, 201kw generator set lease, leased trailer generator set, lease Cummins diesel generator set price, rent  Lease 200kw Cummins diesel generator set, generator set quote lease, lease Cummins diesel generator set factory, lease small and medium sized generator set, lease 30kw diesel generator set, lease 190kw diesel generator set, 110kw generator set lease, small generator set lease, automated generator set Leasing, diesel generator plant leasing 

Engine flywheel housing

installation

TOC

Install two Cummins ISB5.9 G CM2180 engine rear mount.

Install the flywheel and clutch (if equipped). Refer to the manufacturer's instructions.

Install the gearbox and related components. Refer to the manufacturer's instructions.

Install the starter motor. Refer to steps 013-020

Connect the battery cable. Refer to steps 013-009.

Dry clutch application type

Install rectangular seals and lubricate with Lubriplate ™ 105 or equivalent.

Check whether the rear end of the cylinder block and the mounting surface of the flywheel are clean, and there are no raised pull marks or burrs.

Install the flywheel housing on the two ring dowel pins.

NOTE: Ensure that the seal is not damaged during installation.

Tighten the flywheel housing mounting screws in the order shown.

Torque: 77 nm [57 ft-lb]

Wet clutch application type

Except the following steps, perform the same installation steps as the dry clutch:

Apply pipe sealant to the oil drain plug of the flywheel shell and install it in the bottom hole of the flywheel shell.

Tighten the plug.

Refer to the required torque value for different size pipe plugs.

Install the plastic plug in the tachometer drive shaft access hole.

Install the access cover and new gasket.

Install the screws and tighten.

Torque: 24 nm [212 in-lb]

caveat

When using a steam cleaner, wear safety glasses or a protective mask and wear protective clothing. Hot steam can cause severe personal injury.

caveat

When cleaning with solvents, acids or alkaline materials, follow the manufacturer's recommendations. Wear goggles and protective clothing to avoid personal injury.

Thoroughly clean the mating surfaces of the flywheel housing and the cylinder. These surfaces must be clean and free of oil and debris.

Note: The screw holes on the mounting pad need to be drilled through. Apply Loctite ™ 277 to the screws and insert into the holes.

Coat a continuous layer of ThreeBond ™ around all screw holes on the mounting surface of the flywheel housing.

Apply Loctite 277 to the threads of the mounting screws.

Install and tighten the screws.

Torque: 77 nm [57 ft-lb]

Install the plug in the gear hole of the turning gear.

Cummins ISB5.9 G CM2180 engine crankshaft rear oil seal

installation

TOC

Install the oil seal guide (included in the removal kit) on the crankshaft. Push the oil seal onto the guide and the crankshaft.

Remove the oil seal guide.

Note: When installing the oil seal, apply a neutral soap to the outside diameter of the oil seal frame.

Use the alignment tool to install the oil seal to the correct depth in the housing. Use a hammer to press the oil seal into the housing until the alignment tool is against the housing.

Tap at 12, 3, 6, and 9 o'clock on the tool and press the oil seal evenly to avoid bending the oil seal bracket.

Install the flywheel. Tighten the screws in the order shown.

Refer to steps 016-005

Torque: 137 nm [101 ft-lb]

Cummins ISB5.9 G CM2180 engine flywheel

installation

TOC

Note: When installing a new or overhauled clutch, use a new guide bearing.

Use a mandrel and hammer to remove the guide bearing.

Use Scotch-Brite ™ 7448 or equivalent to clean the pilot holes.

Use a mandrel and hammer to install the guide bearing.

Note: The guide bearing must be flush with the end face of the guide hole during installation.

Put two M12 x 1.25 x 90 mm guide pins are mounted on the crankshaft flanges, 180 degrees apart.

NOTE: If a clutch is used on the device, the clutch platen mounting screw holes may be metric or standard. Make sure you are using the correct screws.

Determine the pattern and size of the screw threads and install two T-handles at points (1) and (2) on the flywheel.

caveat

This part or assembly weighs more than 23 kg [51 lb]. To prevent serious personal injury, be sure to use suitable lifting equipment to lift this part or assembly.

Check whether the rear end surface of the crankshaft and the mounting flange of the flywheel are clean and there are no raised pull marks or burrs.

Install the flywheel on the guide pin.

Lubricate the screw threads and washer surfaces with clean engine oil.

Install 6 screws.

Remove the T-handle and guide pin.

Install the remaining screws into the holes where the guide pins were removed.

Hold the crankshaft while tightening the flywheel screws.

Tighten the screws in a star pattern.

Torque: 137 nm [101 ft-lb]

Refer to the manufacturer's service manual to install the gearbox.

Cummins ISB5.9 G CM2180 engine flexible connecting disk

installation

TOC

Note: Mounting disks and / or snap rings are required on some flexible connection disks. It may be necessary to install all mounting discs and / or snap rings before or at the same time as the flexible coupling discs, as described in the removal process.

Install and tighten the flexible land screws and flexible land.

Torque Value:

Flexible connecting plate screws

30 nm [22 ft-lb]

60 degrees forward.

Cummins ISB5.9 G CM2180 engine starter motor

installation

TOC

Install the starter motor and mounting screws.

Torque: 43 nm [32 ft-lb]

Cummins® brand starter motor

Pay attention

Do not overtighten the electrical connectors. It may cause damage to the starter motor.

Note: The use of position labels can help identify the direction of each wire connector.

Connect the electrical connector to the starter motor.

Torque Value:

M5

4 nm [35 in-lb]

Torque Value:

M10

21 nm [186 in-lb]

caveat

Batteries may emit explosive gas. In order to avoid personal injury as much as possible, the Cummins ISB5.9 G CM2180 engine compartment must be well ventilated before battery maintenance. To avoid arcing, remove the negative (-) battery cable first and connect the negative (-) battery cable last.

caveat

Acid is very dangerous and can damage the machine and cause severe burns. When maintaining the battery, prepare a bucket of high-concentration soda as a neutralizer. Wear goggles and protective clothing to avoid serious personal injury.

Before connecting to the battery, clean the inside of the battery terminals with a brush.

Connect the battery cable and finally the negative (-) cable.

Non-Cummins® Brand Starter Motors

Pay attention

Do not overtighten the electrical connectors. It may cause damage to the starter motor.

Note: The use of position labels can help identify the direction of each wire connector.

Install the starter motor electrical connector.

For starter motors not manufactured by Cummins, refer to the OEM service manual for torque specifications.

caveat

Batteries may emit explosive gas. In order to avoid personal injury as much as possible, the Cummins ISB5.9 G CM2180 engine compartment must be well ventilated before battery maintenance. To avoid arcing, remove the negative (-) battery cable first and connect the negative (-) battery cable last.

caveat

Acid is very dangerous and can damage the machine and cause severe burns. When maintaining the battery, prepare a bucket of high-concentration soda as a neutralizer. Wear goggles and protective clothing to avoid serious personal injury.

Before connecting to the battery, clean the inside of the battery terminals with a brush.

Connect the battery cable and finally the negative (-) cable.

Cummins ISB5.9 G CM2180 engine rear bracket

installation

TOC

Mounting bracket and mounting screws.

Torque: 71 nm [52 ft-lb]

Lower the rear of the Cummins ISB5.9 G CM2180 engine.

Cummins ISB5.9 G CM2180 engine mounting screws.

Tighten the screws according to the manufacturer's specifications.

Remove the lifting tool or lifting equipment from the rear of the Cummins ISB5.9 G CM2180 engine.

Cummins ISB5.9 G CM2180 engine water inlet fitting

installation

TOC

Mounting screws, inlet fittings, gaskets and rectangular seals.

Align the rolling pins against the front of the cylinder and tighten the screws.

Torque Value:

M10

43 nm [32 ft-lb]

Torque Value:

M12

80 nm [59 ft-lb]

Cummins ISB5.9 G CM2180 engine water pump

installation

TOC

Install a new seal into the pump groove.

Install the water pump.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine coolant heater

installation

TOC

Lubricate the new heater o-ring with clean engine oil.

The locking tube (T-bar) must be screwed out to the end of the bolt. If so, do not remove the fixing wire for fixing the locking tube (T-bar).

Hang one tube (T-bar) of the filter element and the locking tube into the hole shown in the figure.

Hang the other tube of the locking tube in the hole and push the heater into the hole by hand as far as possible.

Pay attention

Do not use a locking bolt to pull the heater into place, as the locking tube (T-bar) may bend or loosen the threads.

If necessary, tap the heater with a plastic hammer until the shoulders touch the cylinder.

Tighten the block heater fixing nut.

Torque Value:

Minimum:

1.3 nm [12 in-lb]

Torque Value:

maximum:

2.8 nm [25 in-lb]

NOTE: Do not over-tighten as this may cause damage.

Fully automatic generator set leasing, 160 kW generator set leasing, generator set leasing market, leased Carter generator set, leased 200kw diesel generator set, leased diesel generator set supplier, leased ultra-quiet diesel generator set, leased 120 kW diesel generator set, lease 130 diesel generators, leased 80kw generators, leased 30kw generators, leased 100kw diesel generators, leased 70kw diesel generators, diesel generators Cummins leased, leased 100kw diesel generators
Partner:
Friendly connection:
beetnic.com 电话:400-100-8969 Copyright Ningbo Rixin Power Technology Co., Ltd. ( beetnic.com ) Tel: 400-100-8969
站点地图 在线客服客服经理手机版浙 ICP 备 09086525 号 -3 " Site Map " Online Customer Service Manager Mobile Version

Copyright: Please do not steal picture information about unauthorized merchants. Once you find unauthorized use of our authorized information, you will be held responsible for copyright, please be careful! Thank you for your cooperation!