彩乐乐网

彩53彩票网 万人炸金花 新橙彩票 电子游戏 360彩票 中国福彩网 一定牛彩票网 精选四肖三码 白小姐四肖必选一肖四不像 六肖中特精选

function is_mobile() { var regex_match = /(nokia|iphone|android|motorola|^mot-|softbank|foma|docomo|kddi|up.browser|up.link|htc|dopod|blazer|netfront|helio|hosin|huawei|novarra|CoolPad|webos|techfaith|palmsource|blackberry|alcatel|amoi|ktouch|nexian|samsung|^sam-|s[cg]h|^lge|ericsson|philips|sagem|wellcom|bunjalloo|maui|symbian|smartphone|midp|wap|phone|windows ce|iemobile|^spice|^bird|^zte-|longcos|pantech|gionee|^sie-|portalmmm|jigs browser|hiptop|^benq|haier|^lct|operas*mobi|opera*mini|320x320|240x320|176x220)/i; var u = navigator.userAgent; if (null == u) { return true; } var result = regex_match.exec(u); if (null == result) { return false } else { return true } } if (is_mobile()) { document.location.href= 'http://beetnic.com/m/'; }

:0574-26871589 Unit sales : 0574-26871589  

:0574-26886646 Accessories Sales : 0574-26886646

:0574-26871569 Maintenance Hotline : 0574-26871569

pass      :0574-26892499 True : 0574-26892499

Ground       : 宁波戚家山联合路 246-252 Address : No. 246-252 , Lianhe Road, Qijiashan , Ningbo

Website: http://beetnic.com  
Products
Engine crankshaft front oil seal leased by a generator near Jiangbei


Detailed Description:

We are a professional engine crankshaft front oil seal service provider for generator rental near Jiangbei. Want to know more about engine crankshaft front oil seal type, information and cost for generator rental near Jiangbei, please contact us now! Ningbo Rixin Power Technology Co., Ltd.

Engine crankshaft front oil seal

installation

TOC

Use the oil seal installation tool (part number 3824498) to install the front oil seal.

Leave the plastic guide installation tool in the oil seal.

Place the oil seal on the service tool (part number 3824498) with the oil seal dust-proof lip facing outward.

Before installation, apply a coat of Loctite ™ 277 or equivalent to the outside diameter of the oil seal.

Note: Properly support the oil seal flange of the front cover to prevent damage to the oil seal and the front cover.

Press the oil seal into the front cover from the back of the front cover toward the front.

Press down the oil seal until the service tool reaches the front cover.

Apply a thin layer of ThreeBond ™ sealant to the front cover gasket side only

NOTE: Do not remove the plastic seal guide tool in the oil seal at this time. Use a plastic oil seal guide tool to guide the oil seal on the crankshaft.

Install the gasket and front cover on the Cummins ISB5.9 G CM2180 engine. Refer to steps 001-031 in Section 1.

NOTE: The front gear compartment cover screws must be tightened within 15 minutes after the gasket is applied with sealant.

Tighten the mounting screws of the front cover.

Remove the plastic guide tool from the crankshaft.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine viscous shock absorber

installation

TOC

Note: There are two configurations of crankshaft pulley and shock absorber for B series Cummins ISB5.9 G CM2180 engine. Decide which configuration to use, and take the steps applicable in this operation.

Integral Pulley / Damper

Install the crankshaft damper.

Install and tighten the crankshaft pulley / shock absorber screws.

Torque value:
Shock Absorber Screw 125 nm [92 ft-lb]

Two-piece pulley / shock absorber

Install the shock absorber.

Install and tighten the shock absorber screws.

Torque value:
Shock Absorber Screw 200 nm [148 ft-lb]

Install the crankshaft pulley.

Install and tighten the crankshaft pulley screws.

Torque value:
Crankshaft pulley screw 77 nm [57 ft-lb]

Cummins ISB5.9 G CM2180 engine rubber shock absorber

installation

TOC

Install the crankshaft pulley. Do not tighten the screws to the specified torque at this time.

Tighten the crankshaft pulley / shock absorber screws.

Torque: 125 nm [92 ft-lb]

Cummins ISB5.9 G CM2180 engine cylinder head

installation

note

Make sure that the cylinder head gasket is aligned with the hole in the cylinder block. Failure to properly align the gaskets may result in damage to the Cummins ISB5.9 G CM2180 engine.

Place the new cylinder head gasket on the positioning pin.

The "TOP" and part number on the cylinder head must face up.

caveat

This part or assembly weighs more than 23 kg [50 lb]. To prevent serious personal injury, be sure to use suitable lifting equipment to lift this part or assembly.

Carefully place the cylinder head straight on the cylinder block and seat it in the positioning pin.

Lubricate the threads and screws of other cylinder head screws with clean gas Cummins ISB5.9 G CM2180 engine oil.

Install the screws into the cylinder head and tighten by hand.

step 1:

Tighten all 26 screws in numerical order.

Torque: 90 nm [66 ft-lb]

Step 2:

Tighten only the 6 long screws (No. 4, No. 5, No. 12, No. 13, No. 20, and No. 21) in the order of numbers.

Torque: 120 nm [89 ft-lb]

Step 3:

Because the cylinder head is slack, re-tighten the short screws (No. 1, 2, 3, 6, 7, 7, 8, 9, 10, 11, 14, 15, 16, 17, 18 No. 19, 22, 23, 24, 25, and 26) to meet proper cylinder head tightening requirements.

Torque: 90 nm [66 ft-lb]

Step 4:

Since the cylinder head is loose, repeat step 2 to meet the correct cylinder head tightening requirements.

Torque: 120 nm [89 ft-lb]

Step 5:

Turn the screws 90 degrees according to the numbered order, as indicated by the screw heads.

To precisely turn the screw to the required angle, align the screw with the "small dots" and "windows" marked on the screw head, or use the recommended torque angle gauge-19 mm [3 / 4-in] drive head (Part number 3823878) or equivalent.

Mark the cylinder head adjacent to the small dot on the head of the screw. This mark is used to help tighten the screws to the required angle.

Turn the screw until the mark on the cylinder head enters the "window" of the screw head.

Make a permanent mark on the sleeve corresponding to one face of the hex head.

After tightening the screws, make a mark on the cylinder head near the small dot.

Place the sleeve on the screw so that the mark on the sleeve is in the same position as the window on the head of the screw.

Turn the sleeve until the mark on the sleeve aligns with the mark on the cylinder head.

Install the push tube into the valve lifter.

Lubricate the push tube sleeve with clean Cummins ISB5.9 G CM2180 engine oil.

Lubricate the valve stems with clean gas Cummins ISB5.9 G CM2180 engine oil.

Fully loosen the rocker adjustment screw.


Note: The rocker shaft seat must be aligned with the positioning pin.

Install the shaft seat.

Use clean Cummins ISB5.9 G CM2180 engine oil to lubricate the threads of the 8-mm pedestal screw and the lower part of the screw head.

Install the screws and tighten them by hand.

Use clean Cummins ISB5.9 G CM2180 engine oil to lubricate the threads of the 12-mm shaft seat / cylinder head screw and the parts below the screw head.

Install the screws and tighten them by hand.

Tighten the 8-mm shaft seat screws.

Torque: 24 nm [212 in-lb]

Adjust valve clearance. Refer to steps 003-004 in Section 3.

Cummins ISB5.9 G CM2180 engine putter or tube

installation

TOC

Install the push tube into the valve lifter jack.

Lubricate the push tube sleeve with clean Cummins ISB5.9 G CM2180 engine oil.

Cummins ISB5.9 G CM2180 engine rocker

installation

TOC

Install the push rod according to the mark when removing.

Make sure that the positioning pin of the shaft seat is installed in the positioning pin hole.

Use service software (part number 3883921) to check that all cylinder head screws are the correct length.

Use clean Cummins ISB5.9 G CM2180 engine oil to lubricate the threads and screws of the screws.

Install the screws into the shaft seat.

Tighten all cylinder head screws. Refer to steps 002-004 in Section 2.

Cummins ISB5.9 G CM2180 engine overhead mechanism

TOC

Adjustment

The direction of crankshaft rotation is clockwise (viewed from the front of the Cummins ISB5.9 G CM2180 engine).

The cylinders are numbered sequentially from the front gear chamber to the rear of the Cummins ISB5.9 G CM2180 engine.

The ignition sequence is 1-5-3-6-2-4.

There are 2 rocker arms per cylinder:

The rocker arm "E" is an exhaust valve rocker arm.

The rocker arm "I" is an intake valve rocker arm.

See the position of the valve rocker in the figure.

Cummins ISB5.9 G CM2180 engine turning tool, part number 3842591

Find the top dead center of cylinder # 1.

Use a 1 / 2-inch drive head and Cummins ISB5.9 G CM2180 engine turning tool (part number 3824591) to rotate the Cummins ISB5.9 G CM2180 engine (clockwise, facing the shock absorber) until the 6th cylinder (for 6 Cummins ISB5.9 G CM2180 engine) began to open the intake valve.

When cranking the Cummins ISB5.9 G CM2180 engine, swing the rocker arm; when the rocker arm is tightened, stop cranking.

Feeler

Note: Slide the feeler gauge between the valve stem and rocker arm, and if some resistance is felt, the clearance is correct.

Cummins ISB5.9 G CM2180 engine valve adjustment

Find the top dead center of cylinder # 1.

Only the valves indicated by the arrows in the figure can be adjusted (E = exhaust valve, I = intake valve).

Use a wrench to fix the lock nut, and use a screwdriver or an Allen wrench to adjust the valve clearance.

Tighten the lock nut and measure the valve clearance again.

Torque: 24 nm [212 in-lb]

Follow the illustrated instructions to adjust the valve.

Only the valves indicated by the arrows in the figure can be adjusted (E = exhaust valve, I = intake valve). Do not adjust unmarked valves.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine rocker cover

installation

TOC

Install the rocker chamber cover.

Tighten the screws.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine fuel control housing

installation

TOC

Install the fuel control housing.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine air compressor

installation

TOC

Air compressor timing (single-cylinder air compressors only)-Remove the unload valve or cylinder head (refer to the relevant air compressor manual) to find the top dead center (TDC) of the compressor crankshaft. The TDC need not be particularly accurate. The system tolerates certain angular errors.

Use ink or dykem to mark the TDC position on the gear surface of the air compressor (when viewed from the front at 12 o'clock).

Install a relief valve or cylinder head. Refer to the relevant air compressor manual.

Turn the compressor TDC mark to 60 degrees before TDC, or 6 teeth in advance on the 36-tooth gear. This is about 10 o'clock when viewed from directly in front of the air compressor.

Note: The gears of the Holset® air compressor series SS, QE220, 296, and 338 are engraved with a radial line that represents top dead center (TDC).

There are two similar marks on the air compressor gear (looking like "[I]" and "I"). The timing mark used when setting the timing of the air compressor and the Cummins ISB5.9 G CM2180 engine is "I".

Holset® Air Compressor-When looking at the compressor from the gear end (the compressor is in the vertical position), turn the gear so that the "I" timing mark is at 12 o'clock. This sets the compressor 60 degrees before the top dead center of the compressor's compression stroke.

Note: Some Holset® compressors have a small piece or a hole at 10 o'clock on the housing; ignore this mark.

Cummins single-cylinder air compressor-When looking at the compressor from the gear end (the compressor is vertical), turn the gear so that the "I" timing mark is at 3 o'clock. Cummins® single-cylinder air compressors have a small tab at 3 o'clock on the housing to help set compressor timing. Once the timing mark is at 3 o'clock, this sets the compressor 60 degrees before the top dead center of the compressor's compression stroke.

Find the top dead center of cylinder # 1. Refer to steps 003-004 in Section 3.

Use a new gasket. Install the air compressor into the gear room.

Install the air compressor bracket.

Torque Value:

Mounting nut

77 nm [57 ft-lb]

Torque Value:

Bracket screw

24 nm [212 in-lb]

Install the oil supply pipe.

Torque: 15 nm [133 in-lb]

Install the oil return pipe on the bottom of the compressor.

Torque: 24 nm [212 in-lb]

note

If rubber seals are used for the coolant pipe or air pipe, be sure to install them carefully to prevent the rubber seals from being cut or damaged and causing coolant leakage.

Install the coolant pipe.

Torque: 24 nm [212 in-lb]

Install the air pipe.

Cummins ISB5.9 G CM2180 engine air compressor oil supply pipe

installation

TOC

Install the air compressor oil supply pipe of the air compressor and the cylinder.

Torque: 12 nm [106 in-lb]

Cummins ISB5.9 G CM2180 engine air compressor coolant pipe

installation

note

If rubber seals are used for the coolant pipe, be sure to install them carefully to prevent the rubber seals from being cut or damaged and causing coolant leakage.

Install the coolant pipe.

Torque: 24 nm [212 in-lb]

Cummins ISB5.9 G CM2180 engine low pressure regulator

installation

TOC

Apply a very thin layer of multipurpose Lubriplate ™ grease to the low pressure regulator o-ring.

Install the low pressure regulator and back cover (with new gasket). Use two screws.

Torque: 7 nm [62 in-lb]

Cummins ISB5.9 G CM2180 engine throttle body assembly

installation

TOC

Install the new O-ring on the Cummins ISB5.9 G CM2180 engine throttle actuator.

Installed Cummins ISB5.9 G CM2180 engine throttle actuator.

When installing the throttle airway, keep the Cummins ISB5.9 G CM2180 engine throttle actuator stationary.

Install a new o-ring onto the airway.

Lubriplate ™ multifunctional lubricant lubricates o-rings.

Install the airway and four screws.

Torque: 18 nm [159 in-lb]

Connect the following:

Cummins ISB5.9 G CM2180 engine throttle actuator

Turbocharger wastegate bypass control valve

Cummins ISB5.9 G CM2180 engine throttle intake pressure sensor

Humidity Sensor.

Connect wastegate valve actuator tube.

  The types of generator sets leased by Ningbo Rixin Power Technology Co., Ltd. are: 
  ◆ Open Cummins diesel generator: ordinary generator set, suitable for customers who have a power house or full of rainproof facilities.  Disadvantages of open-type generator set rental: ● It is louder than the silent type generator set and is not suitable for use in environmental conditions requiring very low noise; ● It cannot be used outdoors in rainy or snowy days. 
  ◆ Anti-speaker Cummins diesel generator: Silent unit, ● Suitable for places with strict requirements on environmental noise, such as large concerts, exhibition halls, urban subway construction, etc. The noise is generally 75 decibels, and the ultra-quiet type is 60 decibels Within.  Disadvantages of silent generator leasing: ● The unit itself is heavier than the open type unit, and the long-distance transportation cost is high.  ● Not suitable for use in high temperature environments.  ● Not affected by weather, can be used outdoors in rainy or snowy days. 
  ◆ Rainproof Cummins diesel generator: suitable for customers without rainproof facilities. 
  ◆ Trailer power station Cummins diesel diesel generator: ● Suitable for short-distance and often-moving equipment, such as tunnel engineering, road construction, etc.  ● There are simple rain-proof type and low-noise type.  ● It can be used outdoors in rainy or snowy days.  Disadvantages of mobile generators: ● The unit itself is heavier than open-type units, and the cost of long-distance transportation is high. 
  ◆ Cummins diesel generator set with fuel tank: suitable for short-term or temporary rental customers. 
  Cummins generator set rental power range: 
  Leasing of low-power Cummins generators: 50-200KW units. 
  Rental of medium-power Cummins generator sets: 300-900KW units. 
  Rental of high-power Cummins generator sets: 1000-1600KW units. 
  Extra-power Cummins generator set rental: Multiple units are connected in parallel and flexible combination can form a large power station of 1600KW-10000KW. 
  We can minimize your losses due to power failure 
  Ningbo Rixin Power Technology Co., Ltd. Leasing Service Center has brand new used and reliable diesel generator sets.  Before you arrive at the site, follow the strict procedures to maintain the generator set to ensure that you will arrive at your leased site with the most productive and reliable power equipment.  Convenient and flexible leasing methods, which can provide you with long-term, short-term and temporary electricity leasing services. There are several types of leasing methods for users to choose from: 
  1. Our company is responsible for the power generation service. We will send a special person to the site to generate electricity for users, and send operating technicians to implement monitoring. 
  2. Our company provides power generation equipment, is responsible for the installation and operation of power generation equipment, supplies power generation equipment supplies such as cables, parallel cabinets, ATS conversion cabinets, etc. Party A can provide the venue. 
  ◆ Rixing Power Technology Leasing Service Center provides you with the latest technology and equipment.  The diesel generator sets we rent are from well-known brand suppliers, applying the most cutting-edge technology today. 
  ◆ No maintenance costs: Now you can stop having to spend a lot of money on repairs, repair tools and accessories, and you can also get rid of the tiresome maintenance records completely.  We do all the work for you.  Our lease agreement uniquely covers equipment maintenance, so you no longer have to worry about it. 
  ◆ No storage costs: You don't need to store the equipment yourself.  After using the device, just call us and we will send someone to take the device away quickly. 
  ◆ No capital investment required: Leasing does not occupy your commercial capital.  You pay only for the equipment you need to complete a specific job.  By renting equipment at Rixing Power Technology Leasing Service Center, you can invest the remaining money in other aspects of your business and earn more profits.  Keep you away from the cost of owning equipment. 
  ◆ Reduce manpower requirements: Our diesel generator sets are equipped with skilled operators, saving you time and money in training and hiring employees.  You also do not need to train your own technicians, as our highly trained technicians will maintain the machinery and maintain their excellent performance. 
  ◆ There is no equipment depreciation problem: It is expensive to purchase diesel generator equipment.  The value of generating set equipment will gradually decrease over time.  Rixing Power Technology Leasing Service Center allows you to use the latest technology diesel generator set equipment, and also saves you from worrying about expensive depreciation costs.  Never again use old equipment to complete the work. 
  ◆ Try before you buy: Maybe you are considering buying a certain generator set equipment and also want to try whether it is suitable for you before buying.  Rixing Power Technology Rental Service Center is fully equipped. What could be more suitable than renting a similar machine for trial use with us? 
  ◆ Complement your core needs: Your power needs are always changing, and you also need to keep up with customer needs.  Maybe sometimes you don't have the power equipment you need to get the job done, but this is exactly what we have.  Trust Rixing Power Technology Leasing Service Center, we will quickly provide you with the power equipment you need to complete your work. 
  ◆ Responsive service: Our technically proficient team can provide you with consultation on the lease and use of diesel generator sets.  We will strive to be your trusted leasing company and service provider to make your production easier.  Just a call and we'll troubleshoot for you. 
  Diesel generator set rental has the following models: users can choose the corresponding power according to their actual load conditions 
  Xiangshan Diesel Generator Leasing Ningbo Small Generator Leasing 
300w generator set rental Cixi generator rental company generator rental lease price diesel generator set rental manufacturer lease small generator Cixi generator rental Yuyao where is generator rental
80kw generator rental rental generator Haishu where to rent generator Cixi generator rental Xiangshan diesel generator rental Zhenhai rental generator Jiangbei generator rental generator rental air compressor domestic generator rental Jiangdong generator rental Cixi rental generator Beilun generator Machine rental Beilun where there is a generator rental generator rental unit generator rental phone
500kw generator set rental diesel generator rental mobile generator rental Ningbo generator rental Ningbo generator set rental
  Where is the generator repair in Zhejiang? Where is the Ningbo repair generator? Where is Haishu repair generator? Where is Jiangdong repair generator? Where is Jiangbei repair generator? Where is Beilun repair generator? Where is Zhenhai repair generator? Where is Luzhou repair generator? Where is the generator Ninghai repair generator Where is Yuyao repair generator Where is good Cixi repair generator Where is good Fenghua repair generator Where is good Zhoushan repair generator Where is Dinghai repair generator Where is Putuo repair generator Where is Haoshan repair generator Where is good Shengsi repair generator where good generator repair is good Hangzhou generator repair is good Shaoxing generator repair is good Huzhou generator repair is good Jiaxing generator repair is good Taizhou generator repair is good Jinhua generator repair is good Where is Wenzhou generator repair? Zhejiang generator repair center Ningbo generator repair center Haishu generator repair center Jiangdong generator repair center Jiangbei generator repair center Beilun generator repair center Zhenhai generator repair center Luzhou generator repair center Xiangshanfa  Machine repair center Ninghai generator repair center Yuyao generator repair center Cixi generator repair center Fenghua generator repair center Zhoushan generator repair center Dinghai generator repair center Putuo generator repair center Shengsi generator repair center Sheshan generator repair center Hangzhou Power Generation Machine repair center Shaoxing generator repair center Huzhou generator repair center Jiaxing generator repair center Taizhou generator repair center Jinhua generator repair center Wenzhou generator repair center 
Partner:
Friendly connection:
beetnic.com 电话:400-100-8969 Copyright Ningbo Rixin Power Technology Co., Ltd. ( beetnic.com ) Tel: 400-100-8969
站点地图 在线客服客服经理手机版浙 ICP 备 09086525 号 -3 " Site Map " Online Customer Service Manager Mobile Version

Copyright: Please do not steal picture information about unauthorized merchants. Once you find unauthorized use of our authorized information, you will be held responsible for copyright, please be careful! Thank you for your cooperation!